CTBER-PLUS 8 EVOLUTION TOUCH-SCREEN

 

Acquisition and data processing system. 8 channels.
Developed for the implementation and upgrading of any type of existing machines (even not manufactured by Matest) applicable to:
- Marshall mechanical load frame mod. B042 KIT
- CBR/Marshall 2 speeds load frame mod. S213
- Universal multi-speeds load frame mod. S212
- CBR loading machine motorized mod. S211 KIT

Cyber-Plus 8 Evolution allows:
1. Acquisition up to 8 analogical/digital channels: load cell and linear displacement potentiometric vertical and/or horizontal transducers.

2. execution of the following tests:
- MARSHALL: EN 12697-34 / ASTM D1559 / CNR N. 30 / NF P98-251-2 / BS 598 :107
- INDIRECT TENSILE TEST: EN 12697-23 / ASTM D4123
- DETERMINATION OF THE WATER SENSIBILITY OF BITUMINOUS SPECIMENS: EN 12697-12
- CBR TEST: EN 13286-47 / CNR / UNI 10009 / ASTM D1883 / BS 1377 / NF P94-078.
- UNCONFINED TEST: ASTM D2166

3. execution of the remote control of the digital unit through PC and UTMII software

Hardware specifications:
- 8 independent channels available for the load cells or potentiometrics transducers or stain gages for load, deformation or displacement measurements.
- Stabilized power supply of the analogical channels: 5 Vcc and 3 Vcc
- Analogue input: +/- 20 mV and +/-5 V
- Nominal resolution: 24 bit.
- Acquisition up to 200 readings for each channel.
- Safety discrete On/off output
- Graphic display 1Ⓚ4 VGA colour Touch-Screen.
- Time and calendar system

Firmware specifications:
- Instant visualization of the load measured by an exstensometric cell.
- Instant visualization of the deformation measured by 4 linear displacement transducers.
- Visualization of the graphic of the test.
- Visualization of date and time.
- Semi-automatic configuration and calibration of all transducers connected.
- 20 steps lining that can be set by the enduser.
- Automatic correction of the axis origin for CBR/Marshall tests.
- Automatic calculation and visualization of all the results according to the Standard.
- Setting of all the parameters for test: alarms, zero threshold, endtest percentage, calculation parameters.
- Time/date and language selection (Italian, English, French, German, Spanish, Polish).
- Unlimited file for each type of test
- Symbols of pushbuttons functions
- Informative messages (planning alarms, load cell and strain transducer setting, etc.)
- Safety function for automatic machine stop at max. reached load and deformation of the strain transducer.
- Printing of the results on the incorporated thermal graphic printer (accessory C127N). Transfer and management via Ethernet of the filed data or real-time.

 

 

B044 SET