SEISMOGRAPH, 3 CHANNELS
Used for depth determination of bedrock, foundation investigations, evaluation of gravel, sand, clay etc.deposits. Instruments managed by a micro-processor.
Incorporated printer.
Complete with set of accessories.
Dimensions: 35x29x28 cm
Weight: 9 Kg
EARTH RESISTIVITY METER
Used for ground water researches even to great depths, gravel deposit evaluation, geological surveys for the construction of roads, pipelines etc., study and prevention of landslides.
The system consists of:
- Resisitivity measuring instrument
- 3 unpolarizable electrodes
- 2 current electrodes
- 2 cable reels with 300 m of cable
- 2 cable reels with 100 m of cable
- 2 hammers
- set of standard accessories.
NUCLEAR MOISTURE DENSITY GAUGE, MODEL : S060-01
This gauge offers two modes of operation:
- DIRECT TRANSMISSION MODE is designed for measurements of soils, stone or other materials where both density and moisture content are desired. Direct transmission testing typically offers better precision and control of depth of measurement is the preferred method. Dry Density, Wet Density, Moisture, Percent Moisture and Percent Proctor are provided when testing in the soil mode.
- BACKSCATTER MODE is rapid and nondestructive. Gamma rays enter the test material and those scattered trough the material and reaching the detectors are counted. Backscatter is primarily used to determine density on layers of asphalt and concrete.
Specifications:
• The microprocessor displays all function directly.
• Multiple offsets available to adjust to virtually any field condition.
• Test results in as little as 1 minute allow additional compactive effort to be applied immediately if necessary.
• NI-CAD rechargeable battery, 64h standby.
• AC charger 220V, DC adapter 12-14 V.
• Dimensions: 591x376x231 mm.
• Weight: 13,2 Kg.
NUCLEAR MOISTURE DENSITY GAUGE, MODEL : S060
It provides a rapid method of on-site determination of moisture density content of soils, aggregates and asphaltic concrete.
The microprocessor displays all functions directly: wet and dry density, moisture percent, moisture content, percent compaction for both soils and asphaltic concrete, void ratio and percent air voids.
Surce is 200 mm. with index rods for direct transmission depths in 25 mm. increments. It stores up to 320 field tests, transferable to PC or printer.
Gage dimensions: 400x220x140 mm
Weight: 14 Kg
GEOGAUGE, NON-NUCLEAR DENSITY GAUGE
GEOGAUGE, non nuclear density gauge for site soil compaction control, stiffness and young modulus.
Technical features:
Stiffness 3 to 70 MN/m
Young ’s Modulus 26 to 610 Mpa
Measure Depth from 230 to 310 mm.
Measure Dur ation 75 seconds
Power Six D-Cell Batteries (500 to 1500 measurements)
Dimensions with case 470x420x330 mm
Weight 15 kg.
The GeoGauge is the only hand portable gauge available to provide the required simplicity, quickness and precision to directly measure and monitor the in-place engineering properties and do so at construction speed.
The GeoGauge applies a constant load vibrating force to the soil ’s surface and measures the resulting displacement. This dynamic technology simulates actual in-use conditions. One instrument to link design specifications with compaction in 75 seconds for enhanced QC/QA.
Applications include subgrade, subbase, base monitoring the strength gain of lime, cement, fly-ash and polymer stabilised materials, monitoring the re-compacting of asphalt and cold in-place recycling to peak properties to prevent wasted effort and damaging over-compaction.
The GeoGauge compliments and provides alternative to resilient modulus, Falling Weight Deflectometer, field California Bearing Ratio, plate load test, dynamic cone penetrometer and other measures of strength, stiffness, modulus and deflection.
MOISTURE CONDITION VALUE (MCV) AND CHALK CRUSHING VALUE (CCV)
Moisture condition value (MCV) and chalk crushing value (CCV)
This apparatus is used to measure the minimum comparative effort required to produce near full compaction of a soil, and the rate at which a sample of chalk lumps are crushed.
The unit can be used to classify chalk as a fill material with saturated moisture content.
The apparatus comprises a robust frame where a rammer falls, mould, scale, counter, accessories.
Weight: 60 kg approx.
PROCTOR PENETROMETER
Used to determine in field the moisture-penetration resistance relationship of fine grained soils. Spring load scale 0-55 Kg, subdiv. 1 Kg, with direct max. value reading in Kg. on the sliding rod.
Complete with 9 interchangeable stainless steel needles dia. 4,52 5,23 - 6,40 - 9,07 - 12,83 - 16,54 - 20, 22 - 24,79 - 28,55 mm., accessories, carrying case.
Chromed finishing.
Weight: 8 Kg
PROVING RING PENETROMETER
Used to determine the bearing strength, compaction degree of subgrades, and also for determining the penetration resistance of soil.
Supplied complete with “T ” handle,proving ring 100 kgf (1 kN) with maximum load pointer and calibration chart, extension rod 500 mm.long graduated ever y 100 mm., removable cone point 30 ° with 1 sq.in.top area.
Cadmium plated against corrosion.
Weight:5 Kg
MELTING POT, 5l
MELTING POT, capacity: 5 litres
Temperature range: +50 to +350°C., accuracy: +/- 1,5°C.
Complete with pilot lamp, fully isolated to CE Safety Directive.
Internal dimensions: dia. 200 mm x 160 mm
230V 1ph 50/60Hz 800W.
Weight: 3 kg
POCKET SHEAR VALE 0-2 Kg/cm2
POCKET SHEAR VANE DEVICE RANGE: 0-2 KG/CM2.
Identical to mod. S075 but dial range 0-2 Kg/cm 2.
POCKET SHEAR VALE 0-1 Kg/cm2
Designed for the rapid determination in the field or in the laboratory of shear strength of cohesive soils. The dial indicates directly the shearing strength in Kg/cm2.
Complete with interchangeable stainless steel vane, 10x20 mm (dia. x height).
Weight: 300 g.
POCKET PENETROMETER 0-16 Kgf/cm2
POCKET PENETROMETER, identical to mod.S070, but having a range of 0 -16 Kgf/cm 2. Suitable for very compacted soils.
Weight: 800 g.
POCKET PENETROKETER 0-4,5 Kgf/cm2
POCKET PENETROMETER, designed for the rapid determination of soil consistency, shear strength and approximate Unconfined Compression Strength.
Scale range 0-4,5 Kgf/cm 2 with direct reading strength values. Plunger dia.6,35 mm.
Weight:300 g
GEOPOCKET DIAL PENETROMETER
GEOPOCKET DIAL PENETROMETER, designed for a quick determination of the foundation soils, from clay to sandy soils.
It indicates:
- The angle of internal friction (sandy soils)
- The cohesion “c” (clay soils) and the approx. Unconfined Compressive Strength.
Peak hold feature; zero setting by push button. Complete with 5 plungers Ø 6,4 - 10 - 15 - 20 - 25 mm.
Weight: 400 g
DIAL POCKET PENETROMETER 1-14 Kgf/cm2
DIAL POCKET PENETROMETER, identical to mod. S065 but with dial range 1-14 Kg f/cm2, suitable for very compacted soils.
